Frequently Asked Questions

• If you have a WT-30, WT-30LC or WT-30LCI, refer and start on page 8 in your manual
• If you have a WT-35, refer and start on page 8 in your manual

• If you have a WT-26, refer and start on page 7 of your manual

• If you have a WT-26, refer to page 8 in your manual
• If you have a WT-30, WT-30LC or WT-30LCI, refer to page 8
• If you have a WT-35, refer to page 8

• If you have a WT-30LC, WT-30LCI or WT-35, refer to page 15 in your manual
• If you have the DL-1 upgrade on a WT-25LC or WT-25LCI, please download the document in our Troubleshooting section of our website.

Yes. Rewind side air on the system is required for slitting

We offer ¼” and ¾” wide holders

Yes. The 100% Guaranteed Counting Quadrature Count Option is available on all WT-35 series rewind systems.

Our WT-30LCI and WT-35 series systems are capable of inspection on a range from Visual Inspection to Full Label Camera Inspection.

We offer 3 types of Coreholder Options. Mechanical Cam Lock Style, Flange Mounted Air and Lift-off Air Inflatable. An Air coreholder is required on the rewind side of the system for slitting capabilities.

Yes. We offer a transparent label sensor, a metallic inks sensor and a sensor to detect and count dark marks. Please contact us for any special requests.

If you have a WT-20 or WT-15 series system, no. If you have a WT-25 series system, the coreholders can be used on your new rewind system.

Try troubleshooting your HMI touchscreen here