Time is money, so our systems are faster.

See how much you’ll save with a Web Techniques Rewind System.

Calculate Your ROI
Your equipment is great! We’ll continue to use your products as long as we are in business. Your employees and management are very talented, innovative and helpful. We appreciate your company and the ideas that you put forth.
Spencer Brown
Blair Labeling Systems, Inc.
I’ve had a good experience with the hardware and is a well-built machine that has served it’s time well. It is a workhorse for the ways we use it and keeps our reconciliation honest.
Omar Torres
Tarmac Products Inc.
Web Techniques was valuable in helping us select the right table top for the kind of work we are doing. The machine came in on time and worked just as advertised. Follow up service was just as good. We are completely satisfied with our Web Techniques rewinder.
Glen Herlitz
Smyth Companies, LLC
At Clinical Systems we utilize Web Techniques equipment every day. The components they provide to us serve a vital role within our manufacturing process and help us maintain our productivity.
Roger Halvorsen
Clinical Systems
See More Customer Testimonials

WT-25 Series Troubleshooting: Counter Circuit Board

Download PDF

SAFETY WARNING: BEFORE PERFORMING ANY REPAIR TO WEB TECHNIQUES EQUIPMENT, YOU MUST TURN OFF THE POWER AND DISCONNECT THE EQUIPMENT FROM THE POWER SOURCE.

WT-25 Counter Circuit Board LED’s Not Lit

  • Condition: The counter has power (at zero), but the LEDs do not light up on the counter circuit board. Nothing happens when you spin the Counter Drive Roll. Does not count. FIRST, (hear me out on this): Remove the counter circuit board from the counter and the machine and re-install it back on the counter and the machine. Reason is that there could be a corrosion causes poor connections, and by simply removing and reinstalling the counter circuit board can break up some of that corrosion. You would not necessarily be able to see the corrosion.
  • Possible causes:
    • Bad capacitors on the counter circuit board, replace counter circuit board.
    • Bad counter, since the counter supplies the power for the LEDs on the counter circuit board, replace counter.
    • Severed connection between the reed switches and the counter/counter circuit board, test wiring harness.
    • Corroded terminals, Switches are stuck (polymerized)
  • Possible remedies:
    • Remove and reinstall the counter circuit board, (it’s crazy, I know, but sometimes it works—connection issues)
    • Replace counter, counter circuit board and/or reed switches (probably should replace the reed switches anyway, if older).
    • Replace wiring harness from switches to counter circuit board

* Always use “dark energize”, only use light if you are counting a perforated hole.