Time is money, so our systems are faster.

See how much you’ll save with a Web Techniques Rewind System.

Calculate Your ROI
Your equipment is great! We’ll continue to use your products as long as we are in business. Your employees and management are very talented, innovative and helpful. We appreciate your company and the ideas that you put forth.
Spencer Brown
Blair Labeling Systems, Inc.
I’ve had a good experience with the hardware and is a well-built machine that has served it’s time well. It is a workhorse for the ways we use it and keeps our reconciliation honest.
Omar Torres
Tarmac Products Inc.
Web Techniques was valuable in helping us select the right table top for the kind of work we are doing. The machine came in on time and worked just as advertised. Follow up service was just as good. We are completely satisfied with our Web Techniques rewinder.
Glen Herlitz
Smyth Companies, LLC
At Clinical Systems we utilize Web Techniques equipment every day. The components they provide to us serve a vital role within our manufacturing process and help us maintain our productivity.
Roger Halvorsen
Clinical Systems
See More Customer Testimonials

WT-25 Ground Troubleshooting

Download PDF
  • Check the tightness of the large nuts at each end of the flexible conduit that goes from the back of the main control cabinet to the 4 x 4 box on the underside of the table top (below the counter pedestal). Also check the tightness of the conduit connector in the main control cabinet and in the 4 x 4 box.Wt25 ground01 Wt25 ground02
  • See if this green and yellow terminal block is mounted tightly on the track. The screw in the middle of the block is the one that clamps the block to the track.Wt25 ground03There should be a green wire from the left side of the “GND” terminal that attaches to the terminal block mounting track.
  • On later machines, there is a green ground wire attached to the terminal block mounting track that goes from that point, thru the conduit, thru the 4 x 4 box on the bottom of the table top, up through the counter pedestal, and to the ground terminal inside the counter enclosure (the terminal that the counter circuit board ground wire attaches to. We can supply this wire if you want us to do so. It will assure that the counter and table top remain securely grounded in the event that the metal conduit connectors become loose.